Used

Complete Level 3 446 Reciprocating Compressor

Model: 446 Order: RCC399611 Serial: 10817A

We propose to furnish the following used equipment:

  • 1 – Vilter 446 Compressor with base frame, belt driven
  • Standard 33, 66, Unloading
  • Old Style Oil Cooler – water cooled
  • Old Style Isolation valves
  • Old Style unloader solenoids
  • New galvanized OHSA belt guard
  • 1 – World Electric Motor
  • 75Hp 230/460Vac 60Hz 4 pole Type: TIKK
  • Frame: 365T 1765 RPM 92.5% efficiency
  • Compressor was removed working in 2006.
  • Compressor rotates by hand with significant main bearing life remaining, less than 0.001” wear measured at crankshaft, in good condition.
  • Compressor has not been inspected, cleaned or painted, and as considered AS IS condition. Compressor will require a new shaft seal.

6 months parts only warranty. No labor warranty. Item is stock, ready to ship.

Total Price $8,500.00

Not Included

  • Oil & Oil Separator
  • Motor Starter, Shaft Seal Replacement
  • Freight & Sales Tax

Alternate #1

If the compressor suction valve and suction tee fitting and discharge valve and tee and fitting are not needed. (Can be returned after shipment for credit)

Deduct $ 1,000

Alternate #1

If the compressor OSHA belt guard is not needed.

Deduct $ 1,000

Alternate #2

If the 75HP motor is replaced with a used 100HP motor

Add $ 300


Complete Level 3 448 Reciprocating Compressor

We propose to furnish the following used equipment for use on ammonia:

  • 1 – Vilter 448 Compressor with base frame, belt driven
  • Model: A12K448B Order: H47763 Serial: 23140
  • Maximum unloading option 25, 50, 75, 100% Unloading
  • New Style Oil Cooler – water cooled
  • Water cooled cylinder cover heads
  • New Style Isolation valves
  • New Style unloader solenoids
  • New galvanized OHSA belt guard
  • High Oil temp cut out switch
  • High disch, low suction, low oil pressure cut out switches
  • Unloader control switches, total of 4
  • 1 – World Electric Motor
  • 125Hp 230/460Vac 60Hz 4 pole Type: TIKK
  • Frame: 405T 1770 RPM 93.6% efficiency
  • Compressor was removed working in 2006.
  • Compressor rotates by hand with significant main bearing life remaining, less than 0.0005” wear measured at crankshaft, in great condition.
  • Compressor is rebuilt bottom and top end in April 2015.
  • New connecting rod bearings, springs and wearable components

6 months parts only warranty. No labor warranty. Item is stock, ready to ship.

Total Price $15,000.00

Not Included

  • Oil & Oil Separator
  • Motor Starter
  • Freight & Sales Tax

Complete Level 3 456 Reciprocating Compressor

We propose to furnish the following used equipment for use on ammonia:

  • 1 – Vilter 456 Compressor with base frame, belt driven
  • Model: A11K456B Order: E22106-1 Serial: 45611
  • Standard unloading option 25, 50, 75, Capacity Steps
  • Old Style Oil Cooler – water cooled
  • Water cooled cylinder cover heads
  • Old Style Isolation valves
  • New Style unloader solenoids
  • Sturdy OHSA belt guard
  • High disch, low suction, low oil pressure cut out switches
  • 1 – Lincoln Motor
  • 125Hp 460Vac 60Hz
  • Frame: 405T 1770 RPM 91.0% efficiency
  • Compressor was removed working in 2006.
  • Compressor rotates by hand with significant main bearing life remaining, less than 0.0005” wear measured at crankshaft, in great condition.
  • Compressor has not been inspected and as considered AS IS condition. Compressor will require a new shaft seal.

6 months parts only warranty. No labor warranty. Item is stock, ready to ship.

Total Price $8,000.00

Not Included

  • Oil & Oil Separator
  • Motor Starter, Shaft Seal Replacement
  • Freight & Sales Tax

Alternate #1

If the compressor suction valve and suction tee fitting and discharge valve and tee and fitting are not needed. (Can be returned after shipment for credit)

Deduct $1,000

Alternate #2

If the 125HP motor is replaced with a 100HP motor

No Change in Price